CIDQ IDPX Dumps Questions Answers

Stair design per the International Building Code (IBC) Section 1011 requires risers to be between 4" and 7" (102-178 mm) and treads at least 11" (279 mm) deep in commercial settings. To calculate actual dimensions, designers start with the total floor-to-floor height (vertical rise) and divide by the maximum riser height (7") to determine the number of risers, then adjust tread depth accordingly. This ensures compliance with code maximums while fitting the space. Option A and B use "floor opening" (horizontal), which applies to layout, not riser/tread sizing. Option C uses "minimum riser" (4"), which could result in too many steps. Option D aligns with standard practice for safe, code-compliant stairs.

Verified Answer from Official Source:D - Divide floor-to-floor height by maximum riser dimension

"To determine stair riser and tread dimensions, divide the total floor-to-floor height by the maximum allowable riser height (7 inches) to establish the number of risers." (NCIDQ IDPX Study Guide, Section 1: Codes and Standards)

Explanation from Official Source:The NCIDQ explains that this method ensures stairs meet IBC safety standards by starting with the maximum riser height, a critical limit for occupant comfort and egress.

Objectives:

Apply building codes to stair design (IDPX Objective 1.4).

The NCIDQ IDPX exam tests the designer’s understanding of the design development phase, which involves refining the schematic design into detailed drawings and specifications. The interior designer’s deliverables in this phase focus on elements within their scope, such as spatial layouts and finishes.

Option A (Power and data plans, floor plans with partition types):Power and data plans are typically the responsibility of the electrical engineer, not the interior designer, although the designer coordinates these elements. Floor plans with partition types are correct, but this option is incomplete without other key deliverables.

Option B (Floor plans, reflected ceiling plans with HVAC ductwork layout):Floor plans are a correct deliverable, but reflected ceiling plans with HVAC ductwork layout are typically prepared by the mechanical engineer. The interior designer specifies ceiling finishes and fixture types, not HVAC ductwork.

Option C (Reflected ceiling plans with fixture types, floor plans with partition types):This is the correct choice. In the design development phase, the interior designer is responsible for floor plans with partition types (defining spatial layouts and wall constructions) and reflected ceiling plans with fixture types (e.g., lighting, diffusers), which specify the design intent for ceiling elements. These deliverables are within the designer’s scope and critical for this phase.

Option D (Power and data plans, reflected ceiling plans with sprinkler head locations):Power and data plans are the electrical engineer’s responsibility, and sprinkler head locations are typically specified by the fire protection engineer. While the designer coordinates these elements, they are not the designer’s deliverables.

Verified Answer from Official Source:

The correct answer is verified from NCIDQ’s official study materials on the design development phase and designer responsibilities.

“In the design development phase, the interior designer’s deliverables include floor plans with partition types and reflected ceiling plans with fixture types, detailing the spatial and aesthetic design intent.” (NCIDQ IDPX Study Guide, Design Development Section)

The NCIDQ IDPX Study Guide specifies that floor plans with partition types and reflected ceiling plans with fixture types are key deliverables for the interior designer in the design development phase. These documents refine the design and prepare it for contract documents, making Option C the correct answer.

Objectives:

Understand deliverables in the design development phase (NCIDQ IDPX Objective: Design Development).

Apply drawing preparation to advance the design process (NCIDQ IDPX Objective: Contract Documents).

The NCIDQ IDPX exam tests the designer’s understanding of the programming phase, particularly for a project involving the conversion of an existing space. Programming involves gathering information to define the project’s requirements, and for an existing building conversion, understanding the current conditions is critical.

Option A (Identify building codes):Identifying building codes is important, but it is typically done during the schematic design phase or later, after programming establishes the project’s needs. It is not the most important programming activity.

Option B (Prepare record (as-built) drawings):This is the correct choice. For a conversion project, the most important programming activity is to prepare record (as-built) drawings of the existing retail facility. These drawings document the current conditions (e.g., walls, columns, utilities), providing a baseline for planning the new office layout. Without accurate as-built drawings, the designer cannot effectively program the space or proceed with design.

Option C (Calculate the number of parking spaces):Calculating parking spaces is a code-related task that occurs later, typically during schematic design or permitting, after programming defines the office’s occupancy and needs.

Option D (Determine which consultants are required):While determining consultants (e.g., structural engineer, MEP engineer) is important, it is a secondary step that follows after understanding the existing conditions through as-built drawings.

Verified Answer from Official Source:

The correct answer is verified from NCIDQ’s official study materials on programming for existing building conversions.

“For a project involving the conversion of an existing space, the most important programmingactivity is to prepare record (as-built) drawings to document the current conditions and inform the design process.” (NCIDQ IDPX Study Guide, Programming Section)

The NCIDQ IDPX Study Guide emphasizes that preparing as-built drawings is the most critical programming activity for a conversion project, as it provides the foundation for understanding the existing space. This aligns with Option B, making it the correct answer.

Objectives:

Understand programming activities for existing building conversions (NCIDQ IDPX Objective: Programming).

Apply documentation to inform design decisions (NCIDQ IDPX Objective: Project Planning).