Netapp NS0-155 Dumps Questions Answers

http://www.wafl.co.uk/cf/

http://wafl.co.uk/options/

Negotiated failover is a general facility which supports negotiated failover on the basis of decisions made by various modules.

cf.takeover.on_disk_shelf_miscompare

This option allows negotiated takeover to be enabled when the cluster nodes detect a mismatch in disk shelf count. By default, this option is set to off.

This option is available only when cluster is licensed and changing the value on one filer automatically changes the value on the partner filer.

https://library.netapp.com/ecmdocs/ECMP1196986/html/GUID-8A91F6A2-61B8-42C3-AEAB7D5AA9BBE9CF.html

If a disk fails and no hot spare disk that exactly matches the failed disk is available, Data ONTAP uses the best available spare. Understanding how Data ONTAP chooses an appropriate spare when there is no matching spare enables you to optimize your spare allocation for your environment.

Data ONTAP picks a non-matching hot spare based on the following criteria (and more; in the link above):

If the available hot spares are not the correct size, Data ONTAP uses one that is the next size up, if there is one.

The replacement disk is downsized (aka right sized) to match the size of the disk it is replacing; the extra capacity is not available.

https://library.netapp.com/ecmdocs/ECMP1210206/html/GUID-A865DB95-9418-4ED2-A993-74F347F674A0.html

1. Validate that you can access the remote storage by entering the following command:

aggr status -r

Note: A (level-0 resync in progress) message indicates that a plex cannot be rejoined.

2. Turn on the power to the node at the disaster site. After the node at the disaster site boots up, it displays the following:

Waiting for giveback...(Press Ctrl-C to abort wait)

3. If the aggregates at the disaster site are online, take them offline by entering the following command for each aggregate that was split:

aggr offline disaster_aggr

disaster_aggr is the name of the aggregate at the disaster site.

Note: An error message appears if the aggregate is already offline.

4. Destroy every target plex that is in a level-0 resync state by entering the following command:

aggr destroy plex_name

5. Re-create the mirrored aggregates by entering the following command for each aggregate that was split:

aggr mirror aggr_name -v disaster_aggr

aggr_name is the aggregate on the surviving site’s node.

disaster_aggr is the aggregate on the disaster site’s node.

The aggr_name aggregate rejoins the disaster_aggr aggregate to reestablish the MetroCluster configuration.

6. Enter the following command at the partner node:

cf giveback

The node at the disaster site reboots.