L4M3 Commercial Contracting Questions and Answers

Standard terms and conditions are set of terms that is prepared by an organisation. These terms can become the governing terms in low-value, low-risk transactions (or Routine items according to Kraljic's portfolio model). They can be a reference when negotiating for more important contract.

This urgent needs occasionally occur due to a sudden change in circumstances. The process for selecting a replacement supplier must still be controlled. If there is a reason for normal processes to be waived, this must be fully documented and approved at a high level.

The formation of the contract is where the contractual journey begins; if no contract is formed, neither of the parties can be under any obligations. Therefore, it is very important to have an understanding of each part of a contract’s formation.

In order for a legally binding agreement to be formed, there are four basic requirements to be met:

2.1 Offer

2.2 Acceptance

2.3 Certainty & Intention to Create Legal Relations

2.4 Consideration & Promissory Estoppel

NEC - New Engineering Contracts is a family of contracts invented by Institute of Civil Engineers. The contracts are suitable for procuring a diverse range of works, services and supply, ranging from major framework projects through to minor works and the purchase of supplies and goods.

FIDIC is a French language acronym for Fédération Internationale Des Ingénieurs-Conseils, which means the international federation of consulting engineers. It was started in 1913 by the trio of France, Belgium and Switzerland. The United Kingdom joined the Federation in 1949. FIDIC is headquartered in Switzerland and now boasts of membership from over 60 different countries. FIDIC published its first contract, titled The Form of contract for works of Civil Engineering construction, in 1957. As the title indicated, this first contract was aimed at the Civil Engineering sector and it soon became known for the colour of its cover, and thus, The Red Book. It has become the tradition that FIDIC contracts are known in popular parlance by the colour of their cover. This first contract by FIDIC was undertaken jointly with the International federation of Building and Public works. FIDIC’s concerted effort at achieving broad consultation and acceptance of its contract forms has seen subsequent editions of its contracts being ratified by the International Federation of Asian and Western Pacific Contractors Association, Associated General Contractors of America and the Inter-American Federation of the Construction Industry, Multilateral Development Banks among others. Because of the broad support it enjoys, FIDIC contracts are the foremost contracts in international construction.

The Joint Contracts Tribunal, also known as the JCT, produces standard forms of contract for construction, guidance notes and other standard documentation for use in the construction industry in the United Kingdom. From its establishment in 1931, JCT has expanded the number of contributing organisations.

IMechE/IET: Institution of Mechanical Engineers/Institution of Engineering and Technology - two separate institutes that issue jointly agreed model forms covering the design, supply and installation of electrical, electronic and mechanical plant including special conditions for the ancillary development of software.

- The General Agreement on Tariffs and Trade (GATT) is a legal agreement between many countries, whose overall purpose was to promote international trade by reducing or eliminating trade barriers such as tariffs or quotas. According to its preamble, its purpose was the "substantial reduction of tariffs and other trade barriers and the elimination of preferences, on a reciprocal and mutually advantageous basis."

- CISG is the Vienna Convention on Contracts for the International Sale of Goods. This is a voluntary treaty under United Nations Commission on International Trade Law (UNCITRAL). The purpose of the Vienna Convention is to set out a framework for international transactions based on a uniform approach. It establishes substantive rules that regulate the duties and obligations of both parties, including the delivery of goods, contract formation, and remedies for breach of contract.

- The Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS) is an international legal agreement between all the member nations of the World Trade Organization (WTO). It sets down minimum standards for the regulation by national governments of many forms of intellectual property (IP) as applied to nationals of other WTO member nations.

- The North American Free Trade Agreement (NAFTA; Spanish: Tratado de Libre Comercio de América del Norte, TLCAN; French: Accord de libre-échange nord-américain, ALÉNA) is an agreement signed by Canada, Mexico, and the United States, creating a trilateral trade bloc in North America.

There are a number of ways for an offer to be terminated. They are events that may occur after an offer has been made which bring it to an end so that it can no longer be accepted. An offer is terminated in the following circumstances:

1. Revocation

2. Rejection

3. Lapse of time

4. Conditional Offer (or Failure of Conditionality)

5. Operation of law

6. Death

7. Acceptance

8. Illegality

A purchase order is a document sent from a buyer to a seller, with a request to order a product. The purchase order often has its number, description and quantity of the goods, unit prices and total price, name of issuer, time of delivery, standard terms and conditions, etc. It is effectively an offer to supplier. The purchase order will become a formal contract if supplier accepted it by written notice or by performance (such as deliver the goods to the buyer's premise).

Many firms have compliance policies for suppliers in place. To ensure that the supplier actually comply with the standards set out, the purchaser can employ the right to audit. The buyer usually obtains the right to examine records of a vendor to determine if a fraud or a violation of company policy has occurred through the following methods:

- Right-to-audit agreement The agreement can be printed on the back of a purchase order, contract, or other procurement form.

- A simple request If the right-to-audit agreement wasn't included on the procurement form, and the buyer suspects irregularities, he may have to beg the vendor to allow an audit to be performed. If the buyer is a major customer of the vendor, the buyer may be able to wield a big enough stick to obtain permission to look at the records.

- Right-to-audit Pitfalls

Being clear on your objectives helps you to design the best approach to the dialogue. There are some notices in developing dialogue with suppliers:

- All meetings should be documented

- Respect commercial confidentiality. Although insights gained from one conversation lead to questions in another, you must be very careful not to allow this to happen in a way that breaches the confidentiality of the first conversation.

According to CIPS, there are two main types of specification:

- Conformance specification – is more output driven as it outlines the product details exactly which may include the material, dimensions, tolerances, source, ingredients, packaging, storage of the part or material.

- Performance specification – is more output driven in terms of what the part or material must achieve.

Among the four options, only 2. 'Description of the operating environments' and 3. 'Chemical formulae' are possible components of a conformance specification. Brand names can be a part of a performance specification, according to a document published by CIPS and NIGP.

Graphical user interface, text, application Description automatically generated

Many firms have compliance policies for suppliers in place. To ensure that the supplier actually comply with the standards set out, the purchaser can employ the right to audit. The buyer usually obtains the right to examine records of a vendor to determine if a fraud or a violation of company policy has occurred through the following methods:

- Right-to-audit agreement The agreement can be printed on the back of a purchase order, contract, or other procurement form.

- A simple request If the right-to-audit agreement wasn't included on the procurement form, and the buyer suspects irregularities, he may have to beg the vendor to allow an audit to be performed. If the buyer is a major customer of the vendor, the buyer may be able to wield a big enough stick to obtain permission to look at the records.

- Right-to-audit Pitfalls

In order to form a contract to come into being, there are five conditions:

- Offer

- Acceptance

- Consideration

- Intention to be legally bound

- Capacity to contract

Model forms of contract are published by some industry or professional organisations such as FIDIC, ITC, CIPS,... These forms are often carefully prepared by legal professionals, with correct legal terminology. The standard clauses within these forms are based on fair and balanced risk/reward allocation between the contracting parties. The model contract forms also include standard clauses to be selected or deleted on an as required basis.

Despite being standardised to be used in any jurisdiction, legal advice may be required if the users decide to make variations to the forms.

The correct answer should be "Model contract form's standard clauses often contain correct legal terminology without recourse to third party experts."

Hire purchase is an arrangement for buying expensive consumer goods, where the buyer makes an initial down payment and pays the balance plus interest in installments. Ownership is not transferred until the end of the agreement, hire purchase plans offer more protection to the vendor than other sales or leasing methods for unsecured items. That's because the items can be repossessed more easily should the buyer be unable to keep up with the repayments.

The answer is 'When the final instalment is paid'.

Advantages and Disadvantages of using model form contracts.

Model form contracts save a lot of time and money. They are written by industry experts and the buyers and suppliers both understand what is included in the contract.

They are mainly used in Construction and term maintenance contacts. Typical ones are JCT and NEC.

Without the use of model form contracts the buyer and supplier will take a long time to write the terms, negotiate and finalise the contract.

This is time and money wasted.

However, model form contracts require buyers and suppliers to have training so you understand them.

Finally, if you are a buyer in a powerful position you cannot exploit that with a model form contract as these are written for mutual benefit.

Ultra vires is a Latin phrase, meaning "beyond the powers." Describes actions taken by government bodies or corporations that exceed the scope of power given to them by laws or corporate charters. When referring to the acts of government bodies (e.g., legislatures), a constitution is most often the measuring stick of the proper scope of power.

Without further explanation, a schedule may be deemed to form an integral part of the obligations of either or both parties. Obviously, the scope or binding nature of such schedule depends on the way it is referred to in the obligatory language of the main agreement. Accordingly, merely attaching the general terms and conditions of sale without explaining to which part of the sale they apply or which provisions apply does not subject a sale pursuant to the body text of the agreement to those general terms and conditions.

Subcontracting is the practice of assigning, or outsourcing, part of the obligations and tasks under a contract to another party known as a subcontractor.

- Strict liability, sometimes called absolute liability, is the legal responsibility for damages, or injury, even if the person found strictly liable was not at fault or negligent. Strict liability has been applied to certain activities in tort, such as holding an employer absolutely liable for the torts of her employees, but today it is most commonly associated with defectively manufactured products. In addition, for reasons of public policy, certain activities may be conducted only if the person conducting them is willing to insure others against the harm that results from the risks the activities create.

- Current liabilities are a company's short-term financial obligations that are due within one year or within a normal operating cycle.

- Non-current liabilities, also called long-term liabilities or long-term debts, are long-term financial obligations listed on a company’s balance sheet

- Contingent liability is a potential liability that may occur, depending on the outcome of an uncertain future event.

- A call off or a term contract is one which exists for a fixed period of time, rather than for a specific purpose

- A formal framework agreement does have some legal standing but it is not a contract, primarily because there is no consideration involved, but it is an overarching (or umbrella) agreement under which contracts can be created (this holds true in English law but may not be right in other jurisdiction)

- A framework arrangement is a rather loose set-up, without any legal standing. It usually occurs when an organisation has decided for itself to limit the number of suppliers it is willing to work with and, through a purely internal process, sets up an approved list of such suppliers.

- A performance management framework including KPIs and targets, the assessment scheme and incentives, disincentives, bonuses and penalties. It is a schedule to a contract and only legally binding if it is referred from contract clauses.

Advantages of using fixed pricing arrangement are as below:

- Budget/income certainty - prices are fixed up front and should not change

- The impact of changes to the supplier's cost base is not fed through to the purchaser. If costs diminish, the supplier will benefit from this, and if costs rise, the purchaser will benefit

Social and environmental criteria are increasingly encouraged in public sector contracting. In the UK, The Public Services (Social Value) Act 2012 encourages public organising to apply social and environmental criteria in contract.

The key substantive elements to be included in a specification are:

- Characteristics of the product or service

- Time scale for delivery

- Response times for defects

- KPIs relating to performance and reliability

- Lifespan and durability expectations

- Documentary requirement for training/user manual and/or management information

- Any specific requirements regarding implementation

Regarding rule of offer and acceptance, there are some differences among legal system around the world. For example, mailbox rule is generally applied in common law countries such as UK, US, Australia,.. while it is ignored in civil law countries. To clarify on rule of offer and acceptance in international trade, offerors may use expressed terms in their offers. These terms known as deemed receipt protocol.

Penetration pricing is a marketing strategy used by businesses to attract customers to a new product or service by offering a lower price during its initial offering. The lower price helps a new product or service penetrate the market and attract customers away from competitors.

Price skimming is a product pricing strategy by which a firm charges the highest initial price that customers will pay and then lowers it over time. As the demand of the first customers is satisfied and competition enters the market, the firm lowers the price to attract another, more price-sensitive segment of the population. The skimming strategy gets its name from "skimming" successive layers of cream, or customer segments, as prices are lowered over time.

Incentive contracts allow sharing of the risks between the contractor and the client. The contractor is reimbursed all its justifiable costs in addition to a calculated fee. Target costing is an element of incentive contracts.

Cost-plus pricing is also known as markup pricing. It's a pricing method where a fixed percentage is added on top of the cost to produce

Express terms are the terms of the agreement which are expressly agreed between the parties. Ideally, they will be written down in a contract between the parties but where the contract is agreed verbally, they will be the terms discussed and agreed between the parties.

The types of express terms to be found in a contract are many and varied and will depend on the type of contract. Any term written into the contract is an express term and may refer to price, time scales, warranties and indemnities, limitations on liability, conditions precedent and so on.