New Year Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: cramtick70

H13-629_V2.5 HCIE-Storage V2.5 Questions and Answers

Questions 4

Maintaining a persistent connection between host and storage, ESXi must support multipathing. Which of the following statements is incorrect regarding multipathing for VMware vSphere 5.5?

Options:

A.

In addition to path failover, multipathing also provides load balancing. Load balancing is the process of distributing I / O load across multiple physical paths.

B.

In the event of a path failover, the virtual machine I / O delays Nintendo pump by 60s.

C.

If the failover takes a long time to complete, the windows virtual machine may interrupt the I / O and eventually fail. To avoid this, set the windows virtual machine timeout to at least 30 seconds.

D.

When coordinating vmware NMP and any installed third-party MPP, the PSA (Pluggable Storage Architecture) performs load and unload multipathing plug-ins and handles physical path discovery and removal.

Buy Now
Questions 5

Which of the following is correcting regarding the read and write performance of the Huawei Oceanstor 9000 node, from highest to lowest?

Options:

A.

P25 Node SSD Hard Drive> P25 Node SAS Hard Drive> P36 Node SATA Hard Drive> P12 SATA Hard Drive> C36 SATA Hard Drive

B.

P25 Node SAS Hard Drive> P25 Node SSD Hard Drive> P36 Node SATA Hard Drive> P12 SATA Hard Drive> C36 SATA Hard Drive

C.

P25 Node SSD Hard Drive> P25 Node SAS Hard Drive> P36 Node> C36 SATA Hard Drive> P12 SATA Hard Drive

D.

P25 Node SSD Hard Drive> P25 Node SAS Hard Drive> C36 SATA Hard Drive> P36 Node SATA Hard Drive> P12 SATA Hard Drive

Buy Now
Questions 6

Which of the following feature is correct about the OceanStor V3 volume mirroring? (Multiple choice.)

Options:

A.

After creating a mirrored volume for a normal LUN, the server read-write IO results in a change as a result of internal information exchange.

B.

The amount of data actually stored on a LUN is 2G, the total copy of the data is 4G. A volume image is created for the LUN, the LUN is mirrored when the copy is generated during system creation.

C.

You can configure a volume mirror for external LUNs or configure external LUNs as mirror copies.

D.

When configuring volume mirroring, mirror copies are required from different disk domains.

Buy Now
Questions 7

Which of the following is true regarding IP drift in the Huawei Oceanstor V3 storage system?

Options:

A.

One Ethernet port can create multiple logical ports

B.

If Ethernet ports A and B are added to VLAN 2, by default the ports A and B data are in the same drift group

C.

If binding port A and physical port B join a unified VLAN, as long as there is a physical port in bonded port A, the service will switch to Physical Port B

D.

When the IP drift mode is set to "Manual", when the port is restored, and the active port link is in a normal state for more than one minute, the system can cut back the service to the main port.

Buy Now
Questions 8

In the OceanStor VIS6600T dual-redundant switch network environment, using OceanStor Toolkit inspection found that "multi-path state detection "does not pass the inspection report. It is found that there are two routes in the 4 paths of the VIS6600T device's 0 node to each LUN of the array. The path status is disabled. According to the analysis, the switch port connected to port 0 of port A0 of node 0 on node 0 of the VIS6600T is visible on the optical switch. The received optical power is much lower than the rated power of the optical module.

What actions should be taken to fix this?

Options:

A.

Replacing the optical module of port 0 in slot A0 of node 0.

B.

Replacing the light of the P0 port in the A0 slot of 0 node.

C.

Replacing the optical module of the port connected to port 0 of the corresponding 0-node A0 slot on the switch.

D.

Reseat the FC interface card corresponding to slot 0 of node A0.

Buy Now
Questions 9

True or false, with RedHat 6 using the storage array Huawei S5500T, when the storage array and the host are directly connected, the storage array host port can select a P2P network topology.

Options:

A.

Correct

B.

mistakes

Buy Now
Questions 10

For the configuration of the management network port and service network port of the VTL engine in the VTL6900 system, the following description is incorrect

Options:

A.

The first time you configure and use eth1, you can directly configure the network port IP on the VTL console

B.

In the command line configuration management network port directory / etc / sysconfig / network-scripts

C.

In the command line configuration, you need to log in to the VTL operating system, the user name is root

D.

After the command line configuration is complete, you need to restart the network service by running the service network restart command

Buy Now
Questions 11

After the Cache mirror function between two controllers in the Ocenanstro T series storage array is enabled, the data of the two controllers and the cache are completely the same and a single controller failure does not affect data availability.

Options:

A.

True

B.

False

Buy Now
Questions 12

Which statements are true about Huawei OceanStor V3 HyperMirror feature? (Multiple Choice)

Options:

A.

Create a mirror LUN for a common LUN. Due to internal information exchange, the LUN ID for hosts’ read and write I/Os changes based on the information exchange result.

B.

A LUN stores 2 GB of data. Create a mirror LUN for this LUN. During the creation, the system automatically generates a copy. The total data amount of the copy and mirror LUN is 4 GB.

C.

HyperMirror can be configured for external LUNs, and external LUNs can be configured as HyperMirror copies.

D.

When configuring HyperMirror, its copies must come from different disk domains.

Buy Now
Questions 13

With Redhat linux enterprise 6 system the df and du commands allow you to see the mnt capacity, as shown below. What causes the capacity shown to not be the same?

redhat: ~ # df -h / mnt

Filesystem Size Used Avail Use% Mounted on

/ dev / sdb 1008M 514M 443M 54% / mnt

redhat: ~ # du -hs / mnt

40k / mnt

Options:

A.

The mnt directory mounted block device is abnormal

B.

The mnt directory is also mounted another block device and some files that are currently open.

C.

The mnt directory have been deleted

D.

This is a bug of the known du and df commands that need to be upgraded to the latest version

Buy Now
Questions 14

Which of the following statements are true regarding HUAWEI OceanStor 18000 Engine, SVP, Disk Enclosure, and PCI-e Switch Interconnections?

Options:

A.

SVP needs to be connected to multiple engines through two PCIe switches, and each engine controller needs to be connected to a PCIe switch to ensure that link redundancy and to improve reliability.

B.

When the control plane is connected to a network, when the engine and the PCI-e switch are interconnected, the port 0, port A3 and PCIe port can be interconnected.

C.

Huawei slot 0 and slot 5 of the OceanStor 18000 engine enclosure can be used to install SAS interface modules and interconnect disk enclosures.

Buy Now
Questions 15

If you need to automate the DR protection of an Oracle database in Replication Director, the configuration flow is:

Options:

A.

Create a site discovery store, find the host registration store, register the host to create a protection policy.

B.

Discovery Store, Discovery Host Registration Store, Register Host Create Site Registration Store Create Protection Group Create Protection Policy.

C.

Found storage, found that the host to create a site registration store, register the host to create a protection group to create a protection strategy.

D.

Create a site registration store, register the host to create a protection group to create a protection policy.

Buy Now
Questions 16

By which of the following technologies can vmware VDI reduce the storage space used by the virtual desktop system?

Options:

A.

View storage accelerator (VSA)

B.

Persona management

C.

Link cloning

D.

SE sparse virtual disk

Buy Now
Questions 17

A customer's database application is running on an OceanStor V3 storage system. The database uses six LUNs. The customer wants to migrate data from the OceanStor V3 storage system to an OceanStor 18000 series storage system based on the functions provided at the storage side. Which statements are true?

(Multiple Choice)

Options:

A.

If you use the HyperReplication function to migrate data on multiple LUNs used by the database, you must add multiple remote replication tasks to one consistency group.

B.

The HyperReplication function can implement online data migration.

C.

After data is migrated using HyperCopy or HyperReplication, services can be started without the need to make any configuration on the host.

D.

If data is migrated using HyperCopy, the migration speed can be dynamically changed during the copy process.

Buy Now
Questions 18

What are the ways of load balancing cluster softwar on Oracle rac? (Multiple choice.)

Options:

A.

Client Balance

B.

Cluster nodes balanced

C.

Service layer balance

D.

Instance load

Buy Now
Questions 19

Which of the following statements about multi-plane system design of the Huawei Oceanstor unified storage system is correct?

Options:

A.

The service plane uses GE channels for data transmission.

B.

The service plane connects the host IO channel, disk IO channel and GE switching channel.

C.

Plane redundancy between each other, when the business plane fails, allowing the use of control plane transmission services.

D.

When the GE switch channel fails, you can use the PCIe switch channel as a backup data transmission channel.

Buy Now
Questions 20

When planning an active-active disaster recovery solution, the business end adopts the cluster application. Which of the following clusters is the application cluster?

Options:

A.

mSCS

B.

Oracle RAC

C.

HACMP

D.

SQL server

Buy Now
Questions 21

The N8000 file system is based on dynamic hierarchical storag. Through the multi-volume file system, you can achieve the same file system text pieces stored in different levels of storage media, such as hot data and ordinary data stored in the SSD disk and SATA disk.

Options:

A.

True

B.

False

Buy Now
Questions 22

In a Huawei disaster preparedness plan using production site deployment with an oracle RAC cluster, to ensure that the disaster recovery database provides normal service should the production site fail, which of the following statements is correct?

Options:

A.

Disaster recovery end must be deployed, oracle rac cluster can not deploy oracle single node.

B.

Oracle RAC grid production side of the file must be copied to the disaster recovery side.

C.

Unable to copy the production side of the FRA file will be able to guarantee the normal provision of services at the northern end.

D.

Production end of the oracle data files and log files can not be placed in the same consistency group.

Buy Now
Questions 23

A bank using the Oceanstor 9000 (v100R001) has officially started on-line operation and into the maintenance phase, maintenance engineer Zhang will be responsible for this. During the maintenance work, the need for periodic inspection of the health of the storage system, which of the following is the method of operation Zhang should. (Multiple choice)

Options:

A.

Zhang received maintenance tasks, immediately use the inspection tools configured for real-time inspection tasks, using the default business package, select the device to be checked, and check the project, immediately start the task of system-wide inspection, inspection results are normal

B.

Xiao Zhang plans to inspect the tournament site every Monday morning at 6:00 am, set up a time patrol strategy, patrol with the start, end time and patrolCheck frequency, the configuration is complete and exit the inspection tool off, follow-up every Monday to see if there is any abnormal inspection report results

C.

Xiao Zhang When adding devices in the inspection tool, the configured device IP is the front-end IP address of one of the devices and the device is entered as requiredSSH login management user name and password

D.

Xiao Zhang revised the management user login password for all devices, so you need to modify the password in the device information registered by the inspection tool, Zhang firstRemove the scheduled inspection task on the inspection tool interface, and then modify the device information

Buy Now
Questions 24

Engineers in strict accordance with the Oceanstor 9000 software installation and operation guide are to complete the pre-inspection and configuration, the software deployment process displayed ome exceptions, the following treatment is appropriate (multiple choice)

Options:

A.

For the "configuration operating system failed" error, check the node / var / log partition and clean up the partition, initialize the system, and then re-run the software deploy

B.

If it is not a failure, restart the deployment after reinstalling the deploy deployment package

C.

After the deployment fails, run the sh /opt/huawei/deploy/script/clean.sh command on each node to initialize the system and restart the software department

D.

After deployment abnormalities, reboot all nodes, reinstall oceanstor tookit, and start the software deployment

Buy Now
Questions 25

SmartVirtualization is an important value-added feature of Huawei OceanStor V3 storage system. Which of the following is correct about its principle and related concepts? (multiple choice)

Options:

A.

The local storage system does not occupy the local storage system when using LUNs in heterogeneous storage systems

B.

For external LUNs, the local storage system can set value-added functions such as remote replication, snapshots, etc.

C.

smartVirtualization uses multipathing software to connect heterogeneous storage in a multipath-redundant manner

D.

smartVirtualization Dictate write data write efficiency is higher than the write-back efficiency

Buy Now
Questions 26

Under the condition of synchronous replication, the peak write bandwidth of an application is 16 MB / s, the average write bandwidth is 500 KB / s, and the average write IO is 8 KB. If the bandwidth utilization rate is 80%, then the disaster recovery end network bandwidth should not be less than:

Options:

A.

180Mb / s

B.

5.5Mb / s

C.

22.5 Mb / s

D.

5.5 Mb / s

Buy Now
Questions 27

In an application scenario, the I/O service model is random read, and the I/O size is about 100 KB. Then, which is the proper stripe depth for LUNs on the storage system?

Options:

A.

8 KB

B.

16 KB

C.

64 KB

D.

128 KB

Buy Now
Questions 28

True or False, during the disaster recovery drill, to you want to switch the service to the disaster recovery end. In order to prove the reliability of the disaster recovery system, you need to test by simul-ation test and other means as much as possible.

Options:

A.

True

B.

False

Buy Now
Questions 29

You want to improve host write performance on the primary storage. Two sets of OceanStor unified storage with synchronous remote replication are effective in doing this is which of the following ways? (Multiple choice.)

Options:

A.

RPO does not require 0 for the scenario, it is recommended to use asynchronous remote replication.

B.

The main storage using smart cache acceleration, speed up the main storage IO processing speed.

C.

According to the service pressure of the LUNs stored on the primary side, assign the home controllers of each LUN to the A and B controllers.

D.

If you are using an asynchronous remote replication scheme, you need to design a startup synchronization time based on the RPO metrics and consider the setting possible startup synchronization time during the business.

Buy Now
Questions 30

Assuming a customer's initial backup capacity of 1TB, the average daily data increment of 10G, with a backup strategy of once a week for all the equipment once a day from Tuesday to Sunday.

All reserve and additional backup data are stored for 4 weeks, regardless of deduplication / redundancy ratio / replication, etc. Calculate the required back-end.

The capacity should not be less than ______. This 1TB is calculated according to 1000G.

Options:

A.

4940G

B.

4280G

C.

5940G

D.

5280G

Buy Now
Questions 31

Which of the following is correct about the OLAP business load characteristics? (multiple choice)

Options:

A.

Read operation for sequential read

B.

A single IO is large, the typical value of 64KB ~ 1MB

C.

No IO write operation

D.

Usually data is not overwritten by the cycle or days to measure

Buy Now
Questions 32

In the OceanStor 18000 storage system, a 15K RPM SAS disk is used. Assuming that the average seek latency of this type of disk is 6 ms. which type of disk can provide a single disk IOPS?

Options:

A.

100

B.

150

C.

125

D.

167

Buy Now
Questions 33

In an OceanStor V3 storage system, a disk domain has multiple types of disks. If one SAS disk is added to the disk domain, all disks of the disk domain will participate in data balancing.

Options:

A.

TRUE

B.

FALSE

Buy Now
Questions 34

You want to partition a hard disk on a Windows Server 2008 R2 system, which of the following should you do?

Options:

A.

Create a 2TB NTFS volume, the default sector (cluster) size is 8KB.

B.

Create a 30GB FAT32 volume, the default sector (cluster) size is 8KB.

C.

NTFS volumes can be set to the largest sector (cluster) to 512KB.

D.

The smallest sector (cluster) that an NTFS volume can set is 4KB.

Buy Now
Questions 35

A customer’s OceanStor V3 controller B is red and the system status indicator is red. The correct way for engineers to deal with this problem is:

Options:

A.

Log in to the management software or the CLI to check whether the controller is online. If it is not online, restart the controller B on the CLI, and observe the startup status and recordStart the abnormal interface and crude without

B.

landing management If you press or CLI to check whether the controller is online, if not online, unplug the controller, through the CLI to observe the start-up status, record KaiAbnormal interface and error

C.

Serial connection to the controller, COM1 port without printing, can be judged as controller failure, need to be replaced

D.

Log in to the management software or CLI to check whether the controller is online, if it is not online, execute restsys, restart the current controller, and observe through the CLIDynamic state, recording abnormal interface and error

Buy Now
Questions 36

A RedHat Linux 6 system includes a specific file folder read and write errors, the file system needs to be modified after the diagnosis. Which of the following is the correct repair operations?

Options:

A.

Direct use of the root user, in the case of the file system is mounted fsck repair

B.

Using the owner of the user data file, perform an fsck fix if the file system is mounted

C.

Use the owner of the user data file to perform a fsck fix on the device if the file system is unmounted

D.

Using the root user, perform a fsck fix on the device while the file system is unmounted

Buy Now
Questions 37

A customer production center is in Chengdu with a disaster recovery center in Shenzhen, using VIS 6600T remote replication capabilities to meet the remote disaster recovery. Which of the following about the VIS6600T copy function is correct?

Options:

A.

DCM (data change map) is mainly used to ensure that the data in the production center is copied to the disaster recovery center according to the order sent by the host to ensure the data consistency

B.

Production, disaster recovery data volume and disaster recovery must be consistent, the name can be inconsistent

C.

Each business configuration a copy volume group, multiple copy volume group can use the same virtual IP

D.

virtual IP and physical IP must be in the same network segment

Buy Now
Questions 38

OceanStor V 3 storage SmartPatition can allocate independent cache space for different LUNs. The capacity of the cache space is read and write.

use.

Options:

A.

Correct

B.

mistakes

Buy Now
Questions 39

When the storage controller BBU is damaged, the controller automatically sets the IO write policy to transparent and is locked to ensure data reliability. Before the fault is recovered, it can be forced to write back.

Options:

A.

True

B.

False

Buy Now
Questions 40

Customers using 5 ESXI 5.5 hosts and configured DRS / HA, are seeing the error "HA insufficient resources" when the administrator starts the DB virtual machine. Using the HA configuration shown in the figure select the correct solution. (multiple choice)

Options:

A.

Stop one or more virtual machines

B.

Suspend one or more virtual machines

C.

Set the virtual machine restart priority

D.

Set host isolation response

Buy Now
Questions 41

What is the correct description of the Huawei Oceanstor 9000 read and write process?

Options:

A.

The CA is responsible for initiating the metadata query

B.

If the global cache read hit, read from the global cache without having to go to the OBS to read the stripe data

C.

Reading data, the MDS is responsible for assembling the slitting data

D.

When writing data, calculate the redundant data by MDS

Buy Now
Questions 42

Which of the following are the basic principles of storage troubleshooting? (multiple choice)

Options:

A.

Locate the exterior first, then the interior

B.

First perform an alarm analysis, then use the replacement method

C.

First find the high-level alarm, then the low-level alarm

D.

Find the common first alarm, after the individual alarm

Buy Now
Questions 43

Which description of the N8000 Clustered NAS file system snapshot features and their application is wrong?

Options:

A.

Snapshot file system can be dedicated as a separate space to the client.

B.

For a file system can create multiple snapshots, support snapshots of the snapshot

C.

Snapshot file system provides only read-only access to external, it cannot provide write operations

D.

File System Snapshot Instantly copy the source file system completely available copy, when due to viruses or man-made misuse and other causes of the original file system is not available, the rollback of the snapshot can restore the original file system.

Buy Now
Questions 44

A company IT system administrator is responsible for the configuration management of OceanStor V3 storage system in Huawei. In the scenario described, which of the following is the correct configuration of Smart Migration:

Options:

A.

Configure LUN A and LUN B on Huawei OceanStor V3, create a snapshot for LUN A, and then use LUN A as the source LUN and LUN B as the Target LUN

B.

Configure the controllers that belong to LUN A and LUN B to be different on OceanStor V3, with LUN A as the source LUN and LUN B as the target LUN

C.

Huawei OceanStor V3 configures LUN A and LUN B, maps LUN B to a host, and then uses LUN A as the source LUN and LUN B as the target LUN

D.

On Huawei OceanStor V3, configure that thick LUN A and thin LUN B belong to the same controller, and LUN A is the source LUN LUN B is the target LUN

Buy Now
Questions 45

True or False, all OceanStor Unified Storage Array disks have the ability to store dirty data after a sudden power failure

Options:

A.

True

B.

False

Buy Now
Questions 46

In two OceanStor unified storage arrays configured with remote replication, the optimal path for remote replication data transmission is:

Options:

A.

Host - "Linking Primary Array Controller -" Linking From Array Controller -> (Forwarding) Controller operating from a LUN

B.

Host - "Primary LUN Controller -" (Forwarding) Primary Device Controller for Linking - "Link from the array controller

C.

Host - Primary LUN Controller -> (Forwarding) Link Primary Fabric Controller - "Linking From Array Controller -"Hair) from LUn work controller

D.

Host - "Link-connected Primary Array Controller -" Link-connected slave array

Buy Now
Questions 47

A customer project deploys an 8-node OceanStor 9000 C Node with full front-end and back-end IB networking. The device is powered on and completes all front-end network ports. During customer front-end business switch interoperability testing, engineers will perform Oceanstor 9000 software installation and deployment. What is considered a best practice for this?

Options:

A.

The engineer thinks the installation PC is connected to NIC1 to complete the software deployment, so connect the installation PC to NIC1

B.

Direct Deployment of Software Without Disconnecting Front End Network and All Network Nodes

C.

Software Deployment Before starting, the engineer configures a temporary back-end IP address on the back end network port B3-0 of the 9000 node (connected to the installation PC)Department DHCP server

D.

The installation of PC directly through the network cable connected to the OM management network switch to complete the software deployment

Buy Now
Questions 48

Which of the following is incorrect regarding the VTL6900 data deduplication featuree?

Options:

A.

The SIR cluster of the VTL6900 supports global deduplication

B.

The deduplication start time of the VTL6900 can be controlled automatically according to the policy

C.

VTL6900 on the specified tape deduplication and remote replication is recommended at the same time

D.

VTL6900 deduplicated tape to do data archiving, the physical tape library in the NC is still non-deduplicated data

Buy Now
Questions 49

The MTTR indicator is used to describe the average continuous time of the failure of a product during operational use or testing.

Options:

A.

True

B.

False

Buy Now
Questions 50

How can you view the WWN HBA card that is in a Windows2008 R2 system?

Options:

A.

In Device Manager, right-click of the HBA card to see its properties

B.

View in Storage Explorer Manager

C.

View using the FC Info tool

D.

CMD command line, enter the diskpart

Buy Now
Questions 51

With Simpana in a multi-card, multi-network environment, you can use the data interface data interface pairs (DIP) to set the data from the source end-to-end network transmission path. Source and destination can use the host name and IP address to describe the network interface.

There are multiple network connections that can be configured to send multiple concurrent data streams. Based on this, which of the following configuration methods should be used? (multiple choice)

Options:

A.

Use the Client properties in the job configuration

B.

By configuring the ValutTracker strategy

C.

In the control panel data Interface pair configuration

D.

Use data IFPaires.exe to configure multi-stream concurrent DIP

Buy Now
Exam Code: H13-629_V2.5
Exam Name: HCIE-Storage V2.5
Last Update: Dec 27, 2024
Questions: 0
H13-629_V2.5 pdf

H13-629_V2.5 PDF

$25.5  $84.99
H13-629_V2.5 Engine

H13-629_V2.5 Testing Engine

$30  $99.99
H13-629_V2.5 PDF + Engine

H13-629_V2.5 PDF + Testing Engine

$255  $850