Black Friday Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: cramtick70

CWNP CWDP-303 Exam Syllabus

Certified Wireless Design Professional

Last Update Nov 24, 2024
Total Questions : 60

What is Included in the CWNP CWDP-303 Exam?

If you want to pass the CWNP CWDP-303 exam on the first attempt, you need an updated study guide for the syllabus and concise and comprehensive study material which is available at Cramtick. Cramtick has all the authentic study material for the CWNP CWDP-303 exam syllabus. You must go through all this information and study guide while doing the preparation and before appearing for the CWDP-303 exam. Our IT professionals have planned and designed the CWNP Certified Wireless Design Professional certification exam preparation guide in such a way to give the exam overview, practice questions, practice test, prerequisites, and information about exam topics facilitating you to go through the CWNP Certified Wireless Design Professional exam. We endorse you to use the preparation material mentioned in this study guide to cover the entire CWNP CWDP-303 syllabus. Cramtick offers 2 formats of CWNP CWDP-303 exam preparation material. Every format that is available at Cramtick aids its customers with new practice questions in PDF format that is printable as hard copies of the syllabus. Cramtick also offers a software testing engine that is GUI based can run on Windows PC and MAC machines. Our testing engine is interactive helping you to keep your test record in your profile so that you can practice more and more until fully ready for the exam.

CWDP-303 Exam Details

CWNP CWDP-303 Exam Detail

Free CWDP-303 Questions

Free CWDP-303 Exam Questions

Get Premium Access

Get Premium Self-Assessment Practice Test

CWNP CWDP-303 Exam Overview :

Exam Name Certified Wireless Design Professional
Exam Code CWDP-303
Official Information https://www.cwnp.com/certifications/cwdp
See Expected Questions CWNP CWDP-303 Expected Questions in Actual Exam
Take Self-Assessment Use CWNP CWDP-303 Practice Test to Assess your preparation - Save Time and Reduce Chances of Failure

CWNP CWDP-303 Exam Topics :

Section Weight Objectives
1.0 Define Specifications for the WLAN – 25% 1.1 Collect and use business requirements
1.1.1 Business use cases and justification
1.1.2 User requirements
1.1.3 Regulatory compliance
1.1.4 Industry compliance

1.2 Collect, define, and use technical requirements
1.2.1 Location services such as RTLS
1.2.2 Latency requirements
1.2.3 Signal strength requirements
1.2.4 Capacity requirements
1.2.5 Security requirements
  • BYOD and guest access
  • Roaming
  • Monitoring
  • Authentication and encryption
1.2.6 Discover applications and their specific requirements
1.2.7 Discover WLAN upgrade requirements when applicable
1.2.8 Define bridge link requirements when applicable
1.2.9 Voice over WLAN (VoWLAN) Requirements
1.2.10 Identify client devices including most Important and least capable device
1.2.11 Requirement Areas

1.3 Identify design constraints
1.3.1 Regulatory compliance
1.3.2 Aesthetics
1.3.3 Budget
1.3.4 Architectural constraints
1.3.5 Mounting restrictions
1.3.6 Access restrictions
1.3.7 Vendor selection
1.3.8 Time constraints
1.3.9 Building codes and safety codes

1.4 Collect, use, and deliver essential documents where applicable
1.4.1 Validated floorplans
1.4.2 Network diagrams
1.4.3 Existing AP locations
1.4.4 Network closet locations
1.4.5 Existing cabling standards
1.4.6 Existing cable drop locations
1.4.7 Switch capabilities and capacity
1.4.8 Existing network services including DNS, DHCP, NTP and authentication servers
1.4.9 PoE capabilities and power budget
1.4.10 Existing wireless system data
1.4.11 Previous design/survey documentation
1.4.12 Site survey deliverables

1.5 Define requirement areas including essential metrics for each requirement
1.5.1 Capacity
1.5.2 Client device types
1.5.3 Applications and their requirements
1.5.4 SSIDs and WLAN profiles
1.5.5 Security settings
1.5.6 Understand the various issues introduced by common vertical markets such as healthcare, education, retail, hospitality, high-density scenarios, public hotspots and outdoor networks

1.6 Implement effective project management
1.6.1 Statement of Work (SoW)
1.6.2 Non-Disclosure Agreements (NDAs)
1.6.3 Project plans
1.6.4 Resource management
1.6.5 Role definition
2.0 Design the WLAN – 45% 2.1 Define WLAN architectures and select the appropriate architecture for a design
2.1.1 Controller-based (physical and virtual controllers)
2.1.2 Distributed (cloud-based and local WNMS)
2.1.3 Standalone/Autonomous APs
2.1.4 Dynamic vs. static channel assignment
2.1.5 Dynamic radio management
2.1.6 Software defined radio
2.1.7 RF profiles
2.1.8 Select and/or recommend the appropriate equipment for the design (APs, antennas, controllers, managed services)

2.2 Produce a design and communicate with appropriate individuals related to the design
2.2.1 Use WLAN design software including the common features found in the solutions provided by various vendors
  • Import and calibrate floor plans
  • Set project parameters
  • Select and place APs and antennas manually or using automated placement tools and define configuration parameters
  • Adjust AP settings to accommodate design requirements
  • Define appropriate requirements areas using software features
  • Define channel plans (MCA or SCA, channel widths, frequency bands, output power levels, DFS and TPC requirements) including solutions for CCI, adjacent channel interference (ACI), non-overlapping ACI, and non-802.11 interferers within regulatory constraints
  • Document cabling requirements
2.2.2 Select and use appropriate tools for a design project
  • Site survey hardware (camera, marking tools, spare batteries, survey trays, 2-way radios, USB adapters, USB hubs, external antennas)
  • Distance measuring tools (laser measure, tape measure, measuring wheel, angle finder, mapping software)
  • Personal Protective Equipment (PPE) (hardhat, steel-toe shoes, glasses, gloves, clean suits, masks, high visibility clothing)
  • Use WLAN analysis tools for appropriate use cases in WLAN design (spectrum analyzer, protocol analyzer, scanner/discovery tools, cable testers)
  • Use performance measurement tools to assist in WLAN design (throughput testers, QoS assessment, network functionality)
  • Perform client measurements and analysis to determine client capabilities (received signal measurements, roaming behavior, QoS capabilities)
  • Gather attenuation measurements for building materials and objects
  • Understand the differences between AP-on-a-Stick surveys and predictive modeling software and select the appropriate solution between them for a design project
2.2.3 Perform a pre-design site survey when required
  • Select and perform the appropriate type of site survey (manual active, manual passive, AP-on-a-Stick)
  • Use the appropriate site survey tools during the survey
  • Gain appropriate access and clearance to perform the survey
  • Document metrics and other information collected during the survey (RSSI, SNR, noise floor, interference, cell coverage, application and connectivity data such as data rates, latency, loss, and retries)
  • Perform survey procedures for bridge links when required
2.2.4 Design special WLAN deployments, including branch and remote offices, mesh networks, and bridge links

2.2.5 Select among common vendor features and make configuration recommendations in a design scenario (band steering, automatic channel selection, load balancing, VLAN configuration)

2.2.6 Design for different client and application types and the constraints they introduce (tablets, barcode scanners, VoIP handsets, laptops, ID badges, location tracking systems, voice and video)

2.2.7 Ensure proper end-to-end QoS is understood and implemented including WMM, wired QoS, QoS markings and queues

2.2.8 Define and recommend proper security solutions in the design including monitoring, authentication servers, EAP methods, authentication, and encryption

2.2.9 Design for secure roaming including 802.11-2016 FT roaming, SCA roaming, vendor roaming solutions, and client support issues

2.3 Create, distribute, and communicate design documentation
2.3.1 Bill of Materials (BoM)
2.3.2 Design report
2.3.3 Physical installation guide
3.0 Deploy the WLAN – 10% 3.1 Ensure proper understanding and implementation of design documentation
3.1.1 Implementation meeting (explain design decisions to implementers and ensure understanding of design deployment)
3.1.2 Distribute documents to appropriate individuals
3.1.3 Select qualified implementation technicians when required

3.2 Perform validation and optimization tasks during deployment
3.2.1 Verify proper AP installation location
3.2.2 Verify PoE provisioning requirements are met
3.2.3 Verify channel selections and output power
3.2.4 Verify aesthetic requirements are met
3.2.5 Verify proper security configuration

3.3 Recommend or perform essential deployment tasks
3.3.1 Understand and perform installation procedures for different WLAN architectures (cloud-based, controller-based, WNMS, autonomous)
3.3.2 Infrastructure configuration supporting the WLAN (DHCP, DNS, NTP, switches and routers)
3.3.3 Channel assignment, automatic radio management, and output power configuration
3.3.4 Installation procedures for cloud-based APs, controller-based APs, WNMS APs, and autonomous APs
4.0 Validate and Optimize the WLAN – 20% 4.1 Perform an RF validation survey
4.1.1 Ensure coverage requirements
4.1.2 Ensure capacity requirements
4.1.3 Evaluate CCI impact

4.2 Perform client performance testing
4.2.1 Application testing
4.2.2 Roaming testing
4.2.3 Connectivity testing

4.3 Recommend and/or perform appropriate physical adjustments
4.3.1 AP locations
4.3.2 Antenna locations

4.4 Recommend and/or perform appropriate configuration adjustments
4.4.1 Transmitter RF output power
4.4.2 RF channel selection
4.4.3 RF channel bandwidth

4.5 Select remediation solutions for problems discovered during post-validation
4.5.1 RF coverage problems
4.5.2 Capacity problems
4.5.3 QoS problems
4.5.4 Security configuration errors
4.5.5 Client connectivity issues
4.5.6 Resolve interference issues

4.6 Implement knowledge transfer and hand-off
4.6.1 End user training
4.6.2 Support staff training
4.6.3 Solution documentation and assets (digital or physical assets, guides, floorplans, configuration documents)
4.6.4 Final meeting (Q&A and hand-off)
 

Updates in the CWNP CWDP-303 Exam Syllabus:

Cramtick's authentic study material entails both practice questions and practice test. CWNP CWDP-303 exam questions and practice test are the best options to appear in the exam confidently and well-prepared. In order to pass the actual Certified Wireless Design Professional CWDP-303 exam in the first attempt, you have to work really hard on these CWNP CWDP-303 questions, offering you with updated study guide, for the whole exam syllabus. While you are studying actual questions, you should also make use of the CWNP CWDP-303 practice test for self-analysis and actual exam simulation by taking it. Studying again and again of actual exam questions will remove your mistakes with the Certified Wireless Design Professional CWDP-303 exam practice test. Online and windows-based, Mac-Based formats of the CWDP-303 exam practice tests are available for self-assessment.

CWDP Wi-Fi Design | CWDP-303 Questions Answers | CWDP-303 Test Prep | Certified Wireless Design Professional Questions PDF | CWDP-303 Online Exam | CWDP-303 Practice Test | CWDP-303 PDF | CWDP-303 Test Questions | CWDP-303 Study Material | CWDP-303 Exam Preparation | CWDP-303 Valid Dumps | CWDP-303 Real Questions | CWDP Wi-Fi Design CWDP-303 Exam Questions