HPE0-V14 Building HPE Hybrid IT Solutions (Rev. 19.41) Questions and Answers

Exhibit:

Which HPE ProLiant Server meets the customer's requirements?

Which HPE ProLiant Server meets the customer's requirements?

A customer just purchased a ProLiant DL385Gemo Plus and warns 10 team more about HPE intelligent Provisioning features.

Which task can the customer complete using HPE Intelligent Provisioning?

A customer recently installed a VMware environment with HPE ProLiants, HPE MSA storage, and Aruba switches.

What should you recommend to the customer to manage their support contracts with HPE?

A solution integrator is installing new equipment to the rack.

Click the recommended location for HPE R/T3000 Extended Runtime Module.

Hot Area:

Which protocol should be used to access an exported directory on a network-attached storage device?

A small, expanding law firm wants to replace its single Windows server

The server will be kept in their library without a rack. They want a server that allows for internal storage growth and is capable of adding PCI adapters.

Which HPE server model type should you recommend?

A local state college is implementing a new VDI cluster to support computer and testing labs. They have the following requirements:

• Three VMware ESXi Hosts, each with one AMD processor, 1 TB of RAM, 16 Gbps FC Dual Port HBA.
• HPE Nimble AF20 with 17 TB usable capacity.
• Integration into an existing HPE FlexFabric 5710 and HPE SN3000B Fibre Channel SAN switches.
• The solution must fit in 7U of rack space. If the customer needs more capacity in the future, they will use scale-out growth.

Which server model should you recommend to this client?

A customer is facing high and unpredictable latency on an HPE ProLiant DL380 Gen10 server equipped with P408i-a controller

Which tool can display an Array Diagnostic Report?

A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost.

Which HPE solution meets this customer’s requirements?

You are reviewing a series of MSA2052 storage designs for a customer’s remote locations. Their largest

remote site requires the highest possible level of internal data protection with at least 20 TB of storage. Which disk drive design is adequate for this site?

Why is RAID 6 the best option for a large RAID set for archive storage on large-capacity drives?

A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.

Which HPE server family meets the customer’s needs?

You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated view of all the system health and configuration information in a single web interface.

Which HPE tool should you use?

A customer needs to purchase a redundant pair of SAN switches for their virtualization environment. The customer requires a total of eight 16 Gbps FC storage ports and eighteen 8 Gbps FC host attachments.

Which switch meets the customer’s needs at the lowest cost?

A customer with a Microsoft server environment wants to consolidate their employee home directories and other company file shares presented from an appliance as a single name space.

Which HPE product should you recommend to the customer?

A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

A customer needs to centralize their backup environment for their branch office They plan to use HPE StoreOnce with catalyst

What should they implement within their backups software to minimize the network load on the remote site?

You are installing a rack at customer site.

How can you ensure redundant power to the rack?

A customer wants to safeguard their server firmware and asks you about the HPE ProLiant Gen10 features that provide this level of security.

Which Gen10 feature best addresses the customer’s concern?

A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality. Which HPE product family will meet this customer’s needs?

A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:

• Multi-protocol connectivity
• Flash-accelerated storage
• Low-cost midline SAS drives

Which HPE storage platform will meet these requirements?

A customer needs to share files among their Linux-based servers in a cost effective manner. The customer is concerned about compatibility with the servers in their environment that run Windows.

Which HPE StoreEasy feature addresses the customer’s concerns?

Match the HPE Tool with its use case. Select all that apply.

You are troubleshooting server issues and need to troubleshoot when online and offline.

Which HPE tool should you use?

You plan to perform maintenance on several systems in a rack. You need to ensure that the rack does not tip when you are working on the equipment.

What should you use?

What should you install with a server for a customer who may need to perform maintenance on the server while it is the rack? (Select two.)

A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment.

Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?

You are installing additional components to a server.

Which HPE resource provides Quickspecs that verify the compatibility of the server hardware with the server?

You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.

How should you install the PDUs to maximize power distribution and space efficiency?

A customer has a single ProLiant DL580 Gen10 running ESXI 7.0. They want to remotely power on the server.

Which locally available management tool should they use to complete this task?

A retail company recently implemented a Video surveillance solution. They now need an MSA storage solution with 100TB capacity. They want to be able to add more disk capacity if needed.

Which HPE tool can help you choose a storage solution, determine the total usable capacity, and create a BOM?

A customer is planning to deploy a branch office server rack. The environment will have the following requirements:

• Single rack with 20 HPE ProLiant DL360 Gen10 Servers.
• Each Server will have 6 x 10G SFP+ Ports.
• Each Server will have a dedicated iLO port.
• The customer requires that only two switches be used.
• The customer requires separate control planes.

Which switch configuration can meet these requirements?

Which HPE MSA storage feature enables tuning the tier-migration algorithm for a virtual volume when creating or modifying the volume?

A client complains about systems reliability issues caused by their staff’s inability to identify the root cause of failures. The client’s lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.

What should you configure in HPE OneView to enable the external monitoring of the managed devices?

A customer plans to use HPE ProLiant servers for an application that requires low latency for all components.

Which workload profile should the customer use?

A nigh school is implementing a DHCP servers to support then production environment. They have the following requirements

• six rack servers, each with 1 CPU from Intel, at least 256GB of RAM. FC Dual Port HBA

• HPE Nimble AF20 with 17TB useable capacity

• integration into their existing HPE FlexFabric 5710 and HPE SN30O0B Fibre Channel SAN switches

if the customer needs more capacity in the future, they will use scale-out growth. Which server model should you recommend to this client?

Match each characteristic to the appropriate RAID level.

When should you choose to populate a server with LRDlMMs?

When installing servers in a rack, a customer has left gaps between the servers.

What should you tell this customer regarding the space between servers? (Select two.)

You are designing a system for a customer that has a contract with a government agency. The contract requires the highest level of security algorithms possible.

Which HPE ProLiant Gen10 feature set will address this customer’s needs?

You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.

Which HPE management solution meets the customer’s needs?

Match the speed and protocol with the appropriate component.