A10-System-Administration A10 Certified Professional System Administration 4 Questions and Answers

Enabling VRRP-A requires that aVCS is operational

Enabling aVCS require VRRP-A is operational

VRRP-A and aVCS operate independently of each other

VRRP-A and aVCS must function simultaneously

2

VRID Default is enough

6

5

3

4

Send logs related to 10.10.10.5 to email address syslog@a10networks.com.

The ACOS device is configured to send log messages by email.

The ACOS administrator’s email is syslog@a10networks.com where SNMP traps will be sent.

The ACOS device is configured to act as SMTP server to forward logging messages for other devices.

Reboot is performed on vMaster and reload operation on vBlades.

All devices in the chassis are rebooted.

Reboot is performed on vMaster.

Reboot is performed only on vBlades.

The command is ignored when the current vMaster is in vMaster maintenance mode.

Any subsequent vmaster-take-over command within the chassis with a parameter smaller than 201 is ignored.

The 200 priority is compared to the current vmaster’s default vrid priority to determine which device controls the chassis.

If an administrator on vBlade B were to simultaneously issue command vcs vmaster-take-over 210, vBlade B would become the vMaster.

There is only 1 member in this A10 Virtual Chassis.

There are at least 2 private partitions configured.

aVCS has been configured, and this host is part of aVCS set 1.

aVCS has been configured, and this host is part of aVCS set 1/1.

Application Delivery Partitions have been configured.